➤ Sizes → 4 – 36"

➤ Pressure Classes → ASME / ANSI Class 900 – 4500

➤ Materials of Construction → Carbon steel (A216 WCB) – standard, Alloy steel (A217 WC9) – standard, Stainless steel (A351 CF8M) – standard, Duplex steel, Exotic alloys, Other materials available upon request

➤ In Compliance → ASME B16.34, PED, Nuclear ASME III Class 1, 2 and 3, Nuclear Safety Related – 10CFR50 Appendix B, SIL

➤ End Connections → Raised face flange – standard, Buttweld – standard, Other end connections available upon request

➤ Shutoff → Absolute zero-leakage shutoff

✔︎ Integral metal seat. With our proprietary HVOF RiTech® coating technology, the integral seat in ValvTechnologies’ valves is resistant to the attack of abrasive magnetite and ferrous oxides that may be seen in the steam flow.

✔︎ Body seal ring. ValvTechnologies employs a field proven seal ring technology to ensure sealing under all operating conditions, up to 1400°F. The body seal ring is loaded at a pressure higher than 20,000 psi. In addition, valves sized three inch and above contain a secondary Grafoil seal to further guarantee reliability

✔︎ Patented coating process. The sealing surfaces are overlaid with tungsten or chromium carbide using our exclusive HVOF RiTech® process. These surfaces have a hardness of 68 – 72 Rc to allow long periods of operation in the most severe conditions.

✔︎ Live-loaded gland area. The V Series’ sealing design features a four stud, live-loaded assembly designed for heavy industrial applications. The sealing material is high purity Grafoil® surrounded by stainless steel wire mesh anti-extrusion rings. The six Belleville® springs (per stud) provide constant load pressure through extreme thermal shocks and prevent wear leaks in high-cycle service.

✔︎ Blow-out proof stem design utilizes a one piece, hard-faced, blow-out proof stem that is inserted through the inside of the body cavity eliminating the possibility of blow-out through the gland area.